2 Algorithms for variable extraction

2.1 BMI (`extract_BMI`)

Extraction of BMI requires the user to specify three codelists. One for BMI scores (codelist_bmi), one for height measurements (codelist_height) and one for weight measurements (codelist_weight). All the BMI, height and weight measurements for each patient in the cohort of interest are then extracted. The algorithm is as follows:

Extract the most recent BMI, height and weight measurements (within the specified time period) according to the user inputted code lists. Observation dates identified using variable obsdate.
- The measurements must be non-missing
- The BMI measurements must be within the user-defined valid range.
Rescale height scores to metres. When numunitid is not \(\in \{173, 432, 3202\}\), which correspond to metres, the measurement is assumed to be centimetres, and the height measurement is divided by 100 (see section 3).
Rescale weight scores to kg. When numunitid is \(\in \{1691, 2318, 2997, 6265\}\), which correspond to stone, the measurement is converted to kg. All other measurements are assumed to be kg (see section 3).
Merge height and weight measurements.
- Calculate BMI for every pair of height and weight measurements using \(\frac{weight}{height^{2}}\).
- Remove BMI scores that are outside the specified range.
- Assign observation date to be the height or weight measurement which occurred first.
Merge the directly recorded BMI scores, with the BMI scores calculated from height and weight.
Take the most recent BMI score within the specified time period, whether it was a directly recorded BMI score, or calculated from height and weight. If both are recorded on the same date, the directly recorded BMI score takes preference.

2.2 Cholesterol/HDL ratio (`extract_cholhdl_ratio`)

Extraction of cholesterol/HDL ratio requires the user to specify three codelists. One for cholesterol/HDL ratio measurements (codelist_ratio), one for total cholesterol measurements (codelist_chol) and one for HDL measurements (codelist_hdl). All the cholesterol/HDL, total cholesterol and cholesterol/HDL measurements for each patient in the cohort of interest are then extracted. The algorithm is as follows:

Extract the most recent cholesterol/HDL, total cholesterol and cholesterol/HDL measurements (within the specified time period) according to the user inputted code lists. Observation dates identified using variable obsdate.
- The measurements must be non-missing
- The cholesterol/HDL ratio measurements must be within the user-defined valid range.
All measurements are assumed to be in the correct unit of measurement (see section 3).
Merge total cholesterol and HDL measurements.
- Calculate cholesterol/HDL for every pair of total cholesterol and HDL measurements using \(\frac{total cholesterol}{HDL}\).
- Remove cholesterol/HDL scores that are outside the specified range.
- Assign observation date to be the total cholesterol or HDL measurement which occurred first.
Merge the directly recorded cholesterol/HDL scores, with the cholesterol/HDL scores calculated from total cholesterol and HDL.
Take the most recent cholesterol/HDL score within the specified time period, whether it was a directly recorded cholesterol/HDL score, or calculated from total cholesterol and HDL. If both are recorded on the same date, the directly recorded cholesterol/HDL score takes preference.

2.3 Diabetes status (`extract_diabetes`)

Extraction of diabetes status requires the user to specify two codelists. One for type 1 diabetes (codelist_type1), and another for type 2 diabetes (codelist_type2). The reason this variable is not treated as a history of type variable and extracted using extract_ho is because often individuals will have a generic code such as diabetes mellitus, which would be used to identify type 2 diabetes, but will also have a specific code such as type 1 diabetes mellitus. This algorithm treats the two as mutually exclusive, and assigns individuals with a code for both type 1 and type 1 diabetes, as having type 1 diabetes. The algorithm is as follows:

Extract type 1 diabetes and type 2 diabetes observations that occurred prior to the index date. Observation dates identified using variable obsdate.
Assign diabetes status.
- If an individual has a code for both type 1 and type 2 diabetes, assign diabetes type 1.

2.4 Smoking status (`extract_smoking`)

Extraction of smoking status requires the user to specify five codelists. One for non-smoker (codelist_non), one for ex-smoker (codelist_ex), one for light smoker (codelist_light), one for moderate smoker (codelist.moderate) and one for heavy smoker (codelist_heavy). For records identified using the light, moderate or heavy smoker code lists, the value variable, which represents number of cigarettes smoker per day, is used to modify the outputted smoking status variable. This is to maximise the number of observations that are defined in the same way (< 10 day is light, 10 - 19 a day is moderate, > 19 is heavy). The value variable for observations recorded as ex-smoker are often denoting the number of cigarettes per day the individual used to smoke, therefore this data is not used to alter the smoking status. If an individuals most recent record is a non-smoker, but an individual has previous records which indicate a history of smoking, the smoking status is altered from non-smoker to ex-smoker. The algorithm is as follows:

Extract the 100 most recent non, ex, light, moderate and heavy smoker observations according to the user inputted code lists. Observation dates identified using variable obsdate.
If the value variable is non-missing for an observation identified using the light, moderate or heavy smoker code lists, re-define this to represent smoking status based on the following definition:
- 1 - 9 per day = light smoker.
- 10 - 19 per day = moderate smoker.
- 19 - 100 per day = heavy smoker.
- More than 100 per day, remove observation.
Define smoking status to be the most recent observation.
If there are multiple on the same date, use the most severe smoking status.
If the most recent observation is non-smoker, but there are codes for ex, light, moderate or heavy smoker prior to this, change to ex-smoker.

3 Summary of units of measurement for test data

In this section we report the different units of measurement that the test data for the above variables may be recorded in. The unit of measurement is denoted with the numunitid variable in the observation file, which has a corresponding lookup file in the CPRD data. We queried the observation data for a large cohort of individuals aged 18 - 85 between 2005 - 2020 using the code lists provided within inst/codelists directory of rcprd.

list.files(system.file("codelists", package = "rcprd"))
#> [1] "edh_bmi_medcodeid.csv"           "edh_chol_medcodeid.csv"         
#> [3] "edh_cholhdl_ratio_medcodeid.csv" "edh_hdl_medcodeid.csv"          
#> [5] "edh_sbp_medcodeid.csv"           "height_medcodeid.csv"           
#> [7] "weight_medcodeid.csv"

The test data was searched separately using each code list, and the resulting unit measurements that were recorded in more than 0.01% of the query are presented. The results of this were fed into the programs for deriving each of those variables (see section 2). When defining a variable, the aim is to convert all measurements to be on the scame scale/unit of measurement. For example, height measurements in metres should be converted to the same scale as those recorded in centimeters. However, for some records, the unit of measurement might be something odd, or missing, meaning it is unclear how to convert onto the desired scale. For observations with such unit measurements, we do not exclude these observations, as they may be correct measurements with a mis-recorded unit measurement. Instead, when extracting variables, and converting relevant unit measurements, we define a minimum and maximum value, and exclude observations that do not fit into this range. As will be seen below, the proportion of observations with unclear unit measurement is small (with the exception of cholesterol/hdl ratio, which is a special case).

Unit measurements for cholesterol/high-density lipoprotein ratio
numunitid	n	Description	prop
65	49	1/1	0.15
218	47	mmol/L	0.14
219	429	mmol/mmol	1.32
260	284	ratio	0.88
292	132	Unk UoM	0.41
405	18	UNKNOWN UNITS	0.06
421	24	.	0.07
986	154	Not given	0.47
4424	728	CHOL/HDL	2.24
NA	30580	NA	94.24

The most common is ‘NA’ (78.95%). The second most common is ‘ratio’ (12.49%) then 1/1 (2.33%). The confusion about unit of measurement is likely due to the fact that this ratio has no unit of measurement, because total cholesterol and high-density lipoprotein have the same unit of measurement. All measurements are therefore assumed to be in the same unit of measurement (ratio).

Unit measurements for total cholesterol
numunitid	n	Description	prop
218	67168	mmol/L	92.74
NA	5256	NA	7.26

The majority of unit measurements are mmol/L (96.35%) or NA (3.54%). All observations are therefore assumed to be recorded in mmol/L.

Unit measurements for high-density lipoprotein
numunitid	n	Description	prop
182	80	MG/DL	0.16
218	46573	mmol/L	92.04
288	12	units	0.02
NA	3936	NA	7.78

The majority of unit measurements are mmol/L (94.21%) or NA (5.67%). All observations are therefore assumed to be recorded in mmol/L.

Unit measurements for body mass index
numunitid	n	Description	prop
108	21	Body Mass Index	0.02
157	64943	kg/m2	52.02
288	21	units	0.02
359	35	Kg/m?	0.03
568	99	BMI	0.08
657	105	Kg/mÂ²	0.08
NA	59555	NA	47.70

The majority of unit measurements are kg/m2 (39.58%), kg/mA2 (1.26%) or NA (58.08%). All observations are therefore assumed to be recorded in kg/m2.

Unit measurements for weight
numunitid	n	Description	prop
156	148873	kg	99.42
827	80	Kgs	0.05
NA	773	NA	0.52

The majority of unit measurements are kg (98.67%) or NA (1.24%). Most observations are therefore assumed to be recorded in kg, however we also know from that for numunitid \(\in {1691, 2318, 2997 or 6265}\), this refers to stone. Observations with these units of measurements are therefore converted to kg.

Unit measurements for height
numunitid	n	Description	prop
210	174602	mm Hg	53.44
212	11013	mm/Hg	3.37
215	12296	mm[Hg]	3.76
216	128757	mmHg	39.41
NA	66	NA	0.02

The majority of unit measurements are cm (96.82%), m (1.7%), metres (0.02%) or NA (.37%). All observations with numunit not corresponding to metres, will be assumed to be in centimetres, and converted to metres to enable estimation of BMI.

Unit measurements for systolic blood pressure
numunitid	n	Description	prop
210	174602	mm Hg	53.44
212	11013	mm/Hg	3.37
215	12296	mm[Hg]	3.76
216	128757	mmHg	39.41
NA	66	NA	0.02

While there is not a unique algorithm for SBP, we still present the results from the database query for this variable. All measurement are in mm/Hg.

Details-on-algorithms-for-extracting-specific-variables

1 Introduction

2 Algorithms for variable extraction

2.1 BMI (`extract_BMI`)

2.2 Cholesterol/HDL ratio (`extract_cholhdl_ratio`)

2.3 Diabetes status (`extract_diabetes`)

2.4 Smoking status (`extract_smoking`)

3 Summary of units of measurement for test data

Details-on-algorithms-for-extracting-specific-variables

1 Introduction

2 Algorithms for variable extraction

2.1 BMI (extract_BMI)

2.2 Cholesterol/HDL ratio (extract_cholhdl_ratio)

2.3 Diabetes status (extract_diabetes)

2.4 Smoking status (extract_smoking)

3 Summary of units of measurement for test data

2.1 BMI (`extract_BMI`)

2.2 Cholesterol/HDL ratio (`extract_cholhdl_ratio`)

2.3 Diabetes status (`extract_diabetes`)

2.4 Smoking status (`extract_smoking`)