# changelog

author: Aleš Kozumplík <ales@redhat.com> - 0.5.3-1
changelog:
  - packaging: bump hawkey dep to 0.4.17. (Ales Kozumplik)
  - api: remove Base.select_group(). (Ales Kozumplik)
  - tests: cleanup our base test case classes a bit. (Ales Kozumplik)
  - Add DNF itself among the protected packages. (Ales Kozumplik)
  - api: plugins: add the resolved() hook. (Ales Kozumplik)
  - api: expose Transaction introspecting in the API. (RhBug:1067156) (Ales Kozumplik)
  - api: add basic documentation for dnf.package.Package. (Ales Kozumplik)
  - tests: cosmetic: conf.protected_packages is ignored, drop it in FakeConf. (Ales Kozumplik)
  - cli: simplify exception handling more. (Ales Kozumplik)
  - Fixed a minor typo in user_faq - 'intall' should be 'install' (Martin Preisler)
  - fixed encoding of parsed config line (RhBug:1110800) (Jan Silhan)
  - syntax: replaced tab with spaces (Jan Silhan)
  - doc: acknowledge the existence of plugins on the man page (RhBug:1112669) (Ales Kozumplik)
  - improve the 'got root?' message of why a transaction couldn't start. (RhBug:1111569) (Ales Kozumplik)
  - traceback in Base.do_transaction. to_utf8() is gone since 06fb280. (Ales Kozumplik)
  - fix traceback from broken string formatting in _retrievePublicKey(). (RhBug:1111997) (Ales Kozumplik)
  - doc: replace Yum with DNF in command_ref.rst (Viktor Ashirov)
  - Fix a missing s in the title (mscherer)
  - api: add dnf.rpm.detect_releasever() (Ales Kozumplik)
  - Detect distroverpkg from 'system-release(release)' (RhBug:1047049) (Ales Kozumplik)
  - bulid: add dnf/conf to cmake. (Ales Kozumplik)
  - lint: clean up most lint messages in dnf.yum.config (Ales Kozumplik)
  - remove: couple of dead-code methods in dnf.yum.config. (Ales Kozumplik)
  - api: document client's responsibility to preset the substitutions. (RhBug:1104757) (Ales Kozumplik)
  - move: rpmUtils -> rpm. (Ales Kozumplik)
  - refactor: move yumvar out into its proper module dnf.conf.substitutions. (Ales Kozumplik)
  - refactor: turn dnf.conf into a package. (Ales Kozumplik)
  - doc: api_base.rst pointing to nonexistent method. (Ales Kozumplik)
  - remove: some logging from Transaction.populate_rpm_ts(). (Ales Kozumplik)
  - Update cli_vs_yum.rst (James Pearson)
  - api: doc: queries relation specifiers, with an example. (RhBug:1105009) (Ales Kozumplik)
  - doc: phrasing in ip_resolve documentation. (Ales Kozumplik)
  - cli: refactored transferring cmdline options to conf (Jan Silhan)
  - cli: added -4/-6 option for using ipv4/ipv6 connection (RhBug:1093420) (Jan Silhan)
  - cosmetic: empty set inicialization (Jan Silhan)
  - repo: improve the RepoError message to include URL. (Ales Kozumplik)
  - remove: dnf.yum.config.writeRawRepoFile(). (Ales Kozumplik)
  - remove: bunch of (now) blank config options. (Ales Kozumplik)
  - removed unique function (Jan Silhan)
  - tests: mock.assert_has_calls() enforces its iterable arguments in py3.4. (Ales Kozumplik)
  - logging: improve how repolist logs the total number of packages. (Ales Kozumplik)
  - logging: Base.close() should not log to the terminal. (Ales Kozumplik)


author: Aleš Kozumplík <ales@redhat.com> - 0.5.4-1
changelog:
  - pkg name from rpm transaction callback is in Unicode (RhBug:1118796) (Jan Silhan)
  - packaging: python3-dnf depends on dnf. (RhBug:1119032) (Ales Kozumplik)
  - Ship /usr/bin/dnf-3 to run DNF under Py3. (RhBug:1117678) (Ales Kozumplik)
  - packaging: own /etc/dnf/plugins. (RhBug:1118178) (Ales Kozumplik)
  - fix: pluginconfpath is a list. (Ales Kozumplik)
  - cosmetic: use classmethod as a decorator in config.py. (Ales Kozumplik)
  - cleanup: imports in dnf.cli.output (Ales Kozumplik)
  - lint: straightforward lint fixes in dnf.cli.output. (Ales Kozumplik)
  - Repo.__setattr__ has to use the parsed value. (Ales Kozumplik)
  - Repo priorities. (RhBug:1048973) (Ales Kozumplik)
  - repo: simplify how things are propagated to repo.hawkey_repo. (Ales Kozumplik)
  - refactor: concentrate Repo.hawkey_repo construction in Repo.__init__(). (Ales Kozumplik)
  - bash-completion: Update command and option lists, sort in same order as --help (Ville Skyttä)
  - bash-completion: Use grep -E instead of deprecated egrep (Ville Skyttä)
  - output: fixed identation of info command output (Jan Silhan)
  - i18n: calculates right width of asian utf-8 strings (RhBug:1116544) (Jan Silhan)
  - transifex update + renamed po files to Fedora conventions (Jan Silhan)
  - remove: CLI: --randomwait (Ales Kozumplik)
  - cli: fix: --installroot has to be used with --releasever (RhBug:1117293) (Ales Kozumplik)
  - Base.reset(goal=True) also resets the group persistor (RhBug:1116839) (Ales Kozumplik)
  - tests: fix failing DistroSync.test_distro_sync(). (Ales Kozumplik)
  - logging: RPM transaction markers are too loud. (Ales Kozumplik)
  - logging: silence drpm a bit. (Ales Kozumplik)
  - logging: put timing functionality into one place. (Ales Kozumplik)
  - repolist: fix traceback with disabled repos. (RhBug:1116845) (Ales Kozumplik)
  - refactor: cleanups in repolist. (Ales Kozumplik)
  - lint: remove some unused imports. (Ales Kozumplik)
  - cli: break out the repolsit command into a separate module. (Ales Kozumplik)
  - does not crash with non-ascii user name (RhBug:1108908) (Jan Silhan)
  - doc: document 'pluginpath' configuration option. (RhBug:1117102) (Ales Kozumplik)
  - Spelling fixes (Ville Skyttä)
  - cli: Fix software name in --version help (Ville Skyttä)
  - doc: ip_resolve documented at two places. remove one. (Ales Kozumplik)


author: Aleš Kozumplík <ales@redhat.com> - 0.5.5-1
changelog:
  - packaging: also add pyliblzma to BuildRequires. (Ales Kozumplik)
  - essential cleanup in dnf.yum.misc, removing a couple of functions too. (Ales Kozumplik)
  - remove: Base.findDeps and friends. (Ales Kozumplik)
  - Make pyliblzma a requriement. (RhBug:1123688) (Ales Kozumplik)
  - whole user name can contain non-ascii chars (RhBug:1121280) (Jan Silhan)
  - Straighten up the exceptions when getting a packages header. (RhBug:1122900) (Ales Kozumplik)
  - tests: refactor: rename test_resource_path() -> resource_path() and use it more. (Ales Kozumplik)
  - transifex update (Jan Silhan)
  - remove: conf.commands. (Ales Kozumplik)
  - proxy username and password, for both CLI and API. (RhBug:1120583) (Ales Kozumplik)
  - conf: only 'main' is a reserved section name. (Ales Kozumplik)
  - refactoring: cleanup a couple of lint warnings in base.py. (Ales Kozumplik)
  - refactoring: move repo reading implementation out of dnf.Base. (Ales Kozumplik)
  - refactor: repo_setopts is a CLI thing and doesn't belong to Base. (Ales Kozumplik)
  - refactor: move cleanup methods to dnf.cli.commands.clean. (Ales Kozumplik)
  - depsolving: doesn't install both architectures of pkg by filename (RhBug:1100946) (Jan Silhan)
  - refactor: put CleanCommand in its own module. (Ales Kozumplik)
  - cli: avoid 'Error: None' output on malformed CLI commands. (Ales Kozumplik)
  - remove the special SIGQUIT handler. (Ales Kozumplik)
  - api: In Repo(), cachedir is a required argument. (Ales Kozumplik)
  - api: better describe how Repos should be created, example. (RhBug:1117789) (Ales Kozumplik)
  - Base._conf lasts the lifetime of Base and can be passed via constructor. (Ales Kozumplik)
  - doc: faq: having Yum and DNF installed at the same time. (Ales Kozumplik)
  - remove: protected_packages config option, it has been ignored. (Ales Kozumplik)
  - fix: misleading error message when no repo is enabled. (Ales Kozumplik)


author: Aleš Kozumplík <ales@redhat.com> - 0.6.0-1
changelog:
  - lint: fix convention violations in the new source files (Radek Holy)
  - Add "updateinfo [<output>] [<availability>] security" command. (RhBug:850912) (Radek Holy)
  - Add "updateinfo [<output>] [<availability>] bugfix" command. (Radek Holy)
  - Add "updateinfo [<output>] [<availability>] enhancement" command. (Radek Holy)
  - Add "updateinfo [<output>] [<availability>] [<package-name>...]" command. (Radek Holy)
  - Add "updateinfo [<output>] [<availability>] [<advisory>...]" command. (Radek Holy)
  - Add "updateinfo [<output>] all" command. (Radek Holy)
  - Add "updateinfo [<output>] updates" command. (Radek Holy)
  - Add "updateinfo [<output>] installed" command. (Radek Holy)
  - Add "-v updateinfo info" command. (Radek Holy)
  - Add "updateinfo info" command. (Radek Holy)
  - Add "updateinfo list" command. (Radek Holy)
  - Add "updateinfo available" command. (Radek Holy)
  - Add "updateinfo summary" command. (Radek Holy)
  - Add basic updateinfo command. (Radek Holy)
  - test: add updateinfo to the testing repository (Radek Holy)
  - test: support adding directory repos to Base stubs (Radek Holy)
  - test: really don't break other tests with the DRPM fixture (Radek Holy)
  - Load UpdateInfo.xml during the sack preparation. (Radek Holy)
  - Add Repo.updateinfo_fn. (Radek Holy)
  - lint: add Selector calls to false positives, it's a hawkey type. (Ales Kozumplik)
  - removed recursive calling of ucd in DownloadError (Jan Silhan)
  - does not throw error when selector is empty (RhBug:1127206) (Jan Silhan)
  - remove etc/version-groups.conf, not used. (Ales Kozumplik)
  - lint: dnf.conf.parser (Ales Kozumplik)
  - rename: dnf.conf.parser.varReplace()->substitute() (Ales Kozumplik)
  - pycomp: add urlparse/urllib.parser. (Ales Kozumplik)
  - move: dnf.yum.parser -> dnf.conf.parser. (Ales Kozumplik)
  - packaging: add dnf-automatic subpackage. (Ales Kozumplik)
  - doc: properly list the authors. (Ales Kozumplik)
  - automatic: add documentation, including dnf.automatic(8) man page. (Ales Kozumplik)
  - dnf-automatic: tool supplying the yum-cron functionality. (Ales Kozumplik)
  - doc: cosmetic: fixed indent in proxy directive (Jan Silhan)
  - include directive support added (RhBug:1055910) (Jan Silhan)
  - refactor: move MultiCallList to util. (Ales Kozumplik)
  - cli: do not output that extra starting newline in list_transaction(). (Ales Kozumplik)
  - refactor: extract CLI cachedir magic to cli.cachedir_fit. (Ales Kozumplik)
  - transifex update (Jan Silhan)
  - move: test_output to tests/cli. (Ales Kozumplik)
  - refactor: move Term into its own module. (Ales Kozumplik)
  - refactoring: cleanup and linting in dnf.exceptions. (Ales Kozumplik)
  - lint: test_cli.py (Ales Kozumplik)
  - lint: rudimentary cleanups in tests.support. (Ales Kozumplik)
  - refactor: loggers are module-level variables. (Ales Kozumplik)
  - groups: promote unknown-reason installed packages to 'group' on group install. (RhBug:1116666) (Ales Kozumplik)
  - c82267f refactoring droppped plugins.run_transaction(). (Ales Kozumplik)
  - cli: sort packages in the transaction summary. (Ales Kozumplik)
  - refactor: cli: massively simplify how errors are propagated from do_transaction(). (Ales Kozumplik)
  - groups: rearrange things in CLI so user has to confirm the group changes. (Ales Kozumplik)
  - groups: commiting the persistor data should only happen at one place. (Ales Kozumplik)
  - groups: visualizing the groups transactions. (Ales Kozumplik)
  - Add dnf.util.get_in() to navigate nested dicts with sequences of keys. (Ales Kozumplik)
  - group persistor: generate diffs between old and new DBs. (Ales Kozumplik)
  - Better quoting in dnf_pylint. (Ales Kozumplik)
  - lint: logging.py. (Ales Kozumplik)
  - Do not print tracebacks to the tty on '-d 10' (RhBug:1118272) (Ales Kozumplik)
  - search: do not double-report no matches. (Ales Kozumplik)
  - refactor: move UpgradeToCommand to its own module. (Ales Kozumplik)


author: Jan Silhan <jsilhan@redhat.com> - 0.6.1-1
changelog:
  - packaging: add dnf-yum. (Ales Kozumplik)
  - cli: added plugins missing hint (RhBug:1132335) (Jan Silhan)
  - using ts.addReinstall for package reinstallation (RhBug:1071854) (Jan Silhan)
  - Add history redo command. (Radek Holy)
  - Add a TransactionConverter class. (Radek Holy)
  - bash-completion: complete `help` with commands (Igor Gnatenko)
  - bash-completion: generate commands dynamically (Igor Gnatenko)
  - base: group_install accepts glob exclude names (RhBug:1131969) (Jan Silhan)
  - README: changed references to new repo location (Jan Silhan)
  - transifex update (Jan Silhan)
  - syntax: fixed indentation (Jan Silhan)
  - removed lt.po which was accidentally added in c2e9b39 (Jan Silhan)
  - lint: fix convention violations in the new source files (Radek Holy)
  - Fix setting of the resolving demand for repo-pkgs command. (Radek Holy)
  - Add repository-packages remove-or-distro-sync command. (RhBug:908764) (Radek Holy)
  - fix: traceback that GroupPersistor._original might not exist. (RhBug:1130878) (Ales Kozumplik)
  - pycomp: drop to_ord(). (Ales Kozumplik)
  - refactor: crypto.keyids_from_pubring() using _extract_signing_subkey(). (Ales Kozumplik)
  - fix: another 32-bit hex() problem in crypto. (Ales Kozumplik)
  - remove: pgpmsg.py. (Ales Kozumplik)
  - replace the whole of pgpmsg.py with gpgme and a dummy context. (Ales Kozumplik)
  - cosmetic: sort methods of Repo according to the coding standard. (Ales Kozumplik)
  - Fix dnf.crypto.keyinfo2keyid(). (Ales Kozumplik)
  - util: get rid of an inconvenient 'default_handle' constant. (Ales Kozumplik)
  - simplify misc.import_key_to_pubring()'s signature. (Ales Kozumplik)
  - cleanup: header of dnf.yum.pgpmsg. (Ales Kozumplik)
  - crypto: add crypto.retrieve() and drop Base._retrievePublicKey() (Ales Kozumplik)
  - cosmetic: order of functions in dnf.crypto. (Ales Kozumplik)
  - unicode: fixed locale.format error (RhBug:1130432) (Jan Silhan)
  - remove: misc.valid_detached_sig(). (Ales Kozumplik)
  - tests: some tests for dnf.crypto. (Ales Kozumplik)
  - crypto: use pubring_dir() context manager systematically. (Ales Kozumplik)
  - Drop unused argument from getgpgkeyinfo(). (Ales Kozumplik)
  - remove: Base._log_key_import(). (Ales Kozumplik)
  - doc: cosmetic: conf_ref: maintain alphabetical order of the options. (Ales Kozumplik)
  - crypto: document crypto options for repo. (Ales Kozumplik)
  - crypto: fixup procgpgkey() to work with Py3 bytes. (Ales Kozumplik)
  - dnf.util.urlopen(): do not create unicode streams for Py3 and bytes for Py2 by default. (Ales Kozumplik)
  - lint: delinting of the repo_gpgcheck patchset. (Ales Kozumplik)
  - Add CLI parts to let the user confirm key imports. (RhBug:1118236) (Ales Kozumplik)
  - gpg: make key decoding work under Py3. (Ales Kozumplik)
  - crypto: add dnf.crypto and fix things up so untrusted repo keys can be imported. (Ales Kozumplik)
  - transifex update (Jan Silhan)
  - syntax: fixed indentation (Jan Silhan)
  - packaging: pygpgme is a requirement. (Ales Kozumplik)
  - remove: support for gpgcakey gets dropped for now. (Ales Kozumplik)
  - repo: smarter _DetailedLibrepoError construction. (Ales Kozumplik)
  - repo: nicer error message on librepo's perform() failure. (Ales Kozumplik)
  - get_best_selector returns empty selector instead of None (Jan Silhan)
  - packaging: add automatic's systemd unit files. (RhBug:1109915) (Ales Kozumplik)
  - automatic: handle 'security' update_cmd. (Ales Kozumplik)


author: Jan Silhan <jsilhan@redhat.com> - 0.6.2-1
changelog:
  - transifex update (Jan Silhan)
  - refactor: move MakeCacheCommand out into its own file. (Ales Kozumplik)
  - api: add dnf.cli.CliError. (Ales Kozumplik)
  - Update user_faq.rst (Stef Krie)
  - Make --refresh play nice with lazy commands. (Ales Kozumplik)
  - bash-completion: more faster completing install/remove (Igor Gnatenko)
  - bash-completion: complete 'clean|groups|repolist' using help (Igor Gnatenko)
  - Allow some commands to use stale metadata. (RhBug:909856) (Ales Kozumplik)
  - does not install new pkgs when updating from local pkgs (RhBug:1134893) (Jan Silhan)
  - doesn't upgrade packages by installing local packages (Related:RhBug:1138700) (Jan Silhan)
  - refactor: repo: separate concepts of 'expiry' and 'sync strategy'. (Ales Kozumplik)
  - fix: dnf.cli.util.* leaks file handles. (Ales Kozumplik)
  - remove: YumRPMTransError. (Ales Kozumplik)
  - rename: Base's runTransaction -> _run_transaction(). (Ales Kozumplik)
  - drop unused parameter of Base.verify_transaction(). (Ales Kozumplik)
  - bash-completion: new completion from scratch (RhBug:1070902) (Igor Gnatenko)
  - py3: add queue.Queue to pycomp. (Ales Kozumplik)
  - locking: store lockfiles with the resource they are locking. (RhBug:1124316) (Ales Kozumplik)
  - groups: marks reason 'group' for packages that have no record yet (RhBug:1136584) (Jan Silhan)
  - goal: renamed undefined name variable (Jan Silhan)
  - refactor: split out and clean up the erase command. (Ales Kozumplik)
  - py3: fix traceback in fmtColumns() on a non-subscriptable 'columns'. (Ales Kozumplik)
  - groups: allow erasing depending packages on remove (RhBug:1135861) (Ales Kozumplik)
  - history: fixed wrong set operation (RhBug:1136223) (Jan Silhan)
  - base: does not reinstall pkgs from local rpms with install command (RhBug:1122617) (Jan Silhan)
  - refactor: crypto: drop the integer keyid representation altogether. (Ales Kozumplik)
  - crypto: fix importing rpmfusion keys. (RhBug:1133830) (Ales Kozumplik)
  - refactor: crypto: Key is a class, not an "info" dict. (Ales Kozumplik)
  - repos: fix total downloaded size reporting for cached packages. (RhBug:1121184) (Ales Kozumplik)


author: Jan Silhan <jsilhan@redhat.com> - 0.6.3-1
changelog:
  - transifex update (Jan Silhan)
  - bash-completion: don't query if we trying to use local file (RhBug:1153543) (Igor Gnatenko)
  - bash-completion: fix local completion (RhBug:1151231) (Igor Gnatenko)
  - bash-completion: use sqlite cache from dnf-plugins-core (Igor Gnatenko)
  - base: output a whole list of installed packages with glob pattern (RhBug:1163063) (Michal Luscon)
  - cli: _process_demands() does not respect --caheonly (RhBug:1151854) (Michal Luscon)
  - new authors added (Jan Silhan)
  - install: allow installation of provides with glob (Related:RhBug:1148353) (Michal Luscon)
  - tests: removed mock patch for _, P_ (Jan Silhan)
  - fixed error summary traceback (RhBug:1151740) (Jan Silhan)
  - doc: swap command alternative mentioned (RhBug:1110780) (Jan Silhan)
  - base: package_reinstall works only with the same package versions (Jan Silhan)
  - base: package_install allows install different arch of installed package (Jan Silhan)
  - base: package_downgrade prints message on failure (Jan Silhan)
  - base: package_upgrade does not reinstall or downgrade (RhBug:1149972) (Jan Silhan)
  - groups: searches also within localized names (RhBug:1150474) (Jan Silhan)
  - Run tests with C locales. (Daniel Mach)
  - Adds new motd emitter for dnf-automatic (RhBug:995537) (Kushal Das)
  - Fix wrong cache directory path used to clean up binary cache (Satoshi Matsumoto)
  - fix: traceback in history info <name> (RhBug: 1149952) (Tim Lauridsen)
  - logging: added logrotate script for hawkey.log (RhBug:1149350) (Jan Silhan)
  - output: renamed displayPkgsInGroups (Jan Silhan)
  - logging: renamed log files (RhBug:1074715)" (Jan Silhan)
  - comps: Environment differentiates optional and mandatory groups (Jan Silhan)
  - group info handles environments (RhBug:1147523) (Jan Silhan)
  - deltarpm enabled by default (RhBug:1148208) (Jan Silhan)
  - doc: deplist command (Jan Silhan)
  - doc: minor fixes + repo references changed (Jan Silhan)
  - spec: requires rpm-plugin-systemd-inhibit (RhBug:1109927) (Jan Silhan)


author: Jan Silhan <jsilhan@redhat.com> - 0.6.4-1
changelog:
  - revert of e56dd41, does not fix BZ:1109927 now (Jan Silhan)
  - revert of 516aad9, does not fix BZ:1071854 now (Jan Silhan)
  - removed unused dnf-makecache.cron (Jan Silhan)
  - renamed erase command to remove (RhBug:1160806) (Jan Silhan)
  - spec: made python3-dnf package installed by default in f23 (Jan Silhan)
  - AUTHORS: changed email address (Jan Silhan)
  - doc: improve the documentation of the "install" command (Radek Holy)
  - "dnf install non-existent" should fail (Radek Holy)
  - tests: add some tests of Base.install (Radek Holy)
  - tests: add some tests of Base.package_install (Radek Holy)
  - Revert "doesn't upgrade packages by installing local packages" (RhBug:1160950) (Radek Holy)
  - lint: fix all Pylint errors in test_install (Radek Holy)
  - tests: add some tests to test_install (Radek Holy)
  - tests: improve some tests in test_install (Radek Holy)
  - cosmetic: reorder tests in test_install (Radek Holy)
  - cosmetic: rename some tests in test_install and add some docstrings (Radek Holy)
  - AUTHORS: updated (Jan Silhan)
  - Add support for armv6hl (Peter Hjalmarsson)
  - doc: subject.__init__(): what is pkg_spec (Jan Silhan)
  - doc: mentioning raising IOError from Base.fill_sack() (Jan Silhan)
  - option_parser: fixed splitting multiple values (RhBug:1186710) (Jan Silhan)
  - AUTHORS: updated (Jan Silhan)
  - Standardize words describing boolean data type (Christopher Meng)
  - build 0.6.4-1 (Jan Silhan)
  - Adapt to librepo-1.7.13, metalink and mirrorlist are not loaded anymore when the repo is local. (Radek Holy)
  - not raises value error when no metadata exist (Jan Silhan)
  - README: fixed formating 2 (Jan Silhan)
  - README: fixed formating (Jan Silhan)
  - README: expanded DNF installation options (Jan Silhan)
  - allow snapshot versions (Michael Mraka)
  - simple script to build test package (Michael Mraka)
  - more standard way to find out latest commit (Michael Mraka)
  - let package version be specified on commandline (Michael Mraka)
  - New version: 0.6.4 (Jan Silhan)
  - Remove lock files during boot (RhBug:1154476) (Michal Luscon)
  - doc: groups are ordered not categories (Jan Silhan)
  - doc: added Package attributes to API (Jan Silhan)
  - README: link to bug reporting guide (Jan Silhan)
  - README: the official documentation is on readthedoc (Jan Silhan)
  - i18n: unicode encoding does not throw error (RhBug:1155877) (Jan Silhan)
  - conf: added minrate repo option (Related:RhBug:1175466) (Jan Silhan)
  - conf: added timeout repo option (RhBug:1175466) (Jan Silhan)
  - doc: api_queries: add 'file' filter description (RhBug:1186461) (Igor Gnatenko)
  - Adapt to librepo-1.7.13, metalink and mirrorlist are not loaded anymore when the repo is local. (Radek Holy)
  - not raises value error when no metadata exist (Jan Silhan)
  - Remove lock files during boot (RhBug:1154476) (Michal Luscon)
  - doc: groups are ordered not categories (Jan Silhan)
  - doc: added Package attributes to API (Jan Silhan)
  - README: link to bug reporting guide (Jan Silhan)
  - README: the official documentation is on readthedoc (Jan Silhan)
  - i18n: unicode encoding does not throw error (RhBug:1155877) (Jan Silhan)
  - conf: added minrate repo option (Related:RhBug:1175466) (Jan Silhan)
  - conf: added timeout repo option (RhBug:1175466) (Jan Silhan)
  - doc: api_queries: add 'file' filter description (RhBug:1186461) (Igor Gnatenko)
  - doc: documenting enablegroups (Jan Silhan)
  - log: printing metadata timestamp (RhBug:1170156) (Jan Silhan)
  - base: setup default cachedir value (RhBug:1184943) (Michal Luscon)
  - orders groups/environments by display_order tag (RhBug:1177002) (Jan Silhan)
  - no need to call create_cmdline_repo (Jan Silhan)
  - base: package-spec matches all packages which the name glob pattern fits (RhBug:1169165) (Michal Luscon)
  - doc: move dnf.conf to appropriate man page section (RhBug:1167982) (Michal Luscon)
  - tests: add test for blocking process lock (Michal Luscon)
  - lock: fix several race conditions in process lock mechanism (Michal Luscon)
  - base: use blocking process lock during download phase (RhBug:1157233) (Michal Luscon)
  - Update the Source0 generation commands in dnf.spec.in file (Parag Nemade)
  - Enhancement to dnf.spec.in file which follows current fedora packaging guidelines (Parag Nemade)
  - doc: add some examples and documentation of the core use case (RhBug:1138096) (Radek Holy)
  - bash-completion: enable downgrading packages for local files (RhBug:1181189) (Igor Gnatenko)
  - group: prints plain package name when package not in any repo (RhBug:1181397) (Jan Silhan)
  - spec: own __pycache__ for python 3 (Igor Gnatenko)
  - changed hawkey.log dir to /var/log (RhBug:1175434) (Jan Silhan)
  - bash-completion: handle sqlite errors (Igor Gnatenko)
  - use LANG=C when invoking 'dnf help' and 'sed' with regular expressions (Jakub Dorňák)
  - spec: own __pycache__ directory for py3 (Igor Gnatenko)
  - doc: mentioning Install command accepts path to local rpm package (Jan Silhan)
  - groups: in erase and install cmd non-existent group does not abort transaction (Jan Silhan)
  - doc: running tests in README (Jan Silhan)
  - api: transaction: added install_set and remove_set (RhBug:1162887) (Jan Silhan)
  - cosmetic: fixed some typos in documentation (Jan Silhan)
  - groups: environments described after @ sign works (RhBug:1156084) (Jan Silhan)
  - own /etc/dnf/protected.d (RhBug:1175098) (Jan Silhan)
  - i18n: computing width of char right (RhBug:1174136) (Jan Silhan)
  - cosmetic: renamed _splitArg -> _split_arg (Jan Silhan)
  - conf: removed include name conflict (RhBug:1055910) (Jan Silhan)
  - output: removed unpredictible decision based on probability introduced in ab4d2c5 (Jan Silhan)
  - output: history list is not limited to 20 records (RhBug:1155918) (Jan Silhan)
  - doc: referenced forgotten bug fix to release notes (Jan Silhan)
  - cosmetic: doc: removed duplicated word (Jan Silhan)
  - doc: described unavailable package corner case with skip_if_unavailable option (RhBug:1119030) (Jan Silhan)
  - log: replaced size with maxsize directive (RhBug:1177394) (Jan Silhan)
  - spec: fixed %ghost log file names (Jan Silhan)


author: Vinzenz Feenstra <vfeenstr@redhat.com> 0.0.1-4
changelog:
  - We also need virsh (vfeenstr@redhat.com)
  - The license choosen for LeApp is now LGPLv2+ (vfeenstr@redhat.com)
  - Missing nmap dependency added (vfeenstr@redhat.com)
  - Drop obsolete __vagrant_ssh_checkoutput (vfeenstr@redhat.com)
  - Drop unnecessary build requires (vfeenstr@redhat.com)


author: Vinzenz Feenstra <vfeenstr@redhat.com> 0.0.1-5
changelog:
  - Touch non existing file workaround not necessary anymore files have been
    already added (vfeenstr@redhat.com)


author: Vinzenz Feenstra <vfeenstr@redhat.com> 0.0.1-32
changelog:
  - ui: Start displaying progress after 'Find apps' was clicked
    (vfeenstr@redhat.com)
  - ui: Add target container naming and listing support (vfeenstr@redhat.com)
  - ui: Print all command output (vfeenstr@redhat.com)
  - Handle running in a Py3 virtual environment (ncoghlan@gmail.com)
  - cli: Fix check-target exception for localhost (vfeenstr@redhat.com)
  - integration-tests: remove trailing spaces (vfeenstr@redhat.com)
  - Remove unused import (amello@redhat.com)
  - Removing container dir is unnecessary since containers have different names
    (amello@redhat.com)
  - Check target access early in migrate-machine (ncoghlan@gmail.com)
  - Update destroy-containers to use check-target (amello@redhat.com)
  - Undo ssh calls changes since they were not necessary after merge
    (amello@redhat.com)
  - ignore_errors flag for rmtree (mfranczy@redhat.com)
  - remove parsed.target condition, now it has default value
    (mfranczy@redhat.com)
  - fixed grep for wlp devices (mfranczy@redhat.com)
  - localhost as default target (mfranczy@redhat.com)
  - cli: Allow to use different user names, identity files etc in migrate-machine
    (vfeenstr@redhat.com)
  - Don't enable early target check tests yet (ncoghlan@gmail.com)
  - Fix function signature definition (ncoghlan@gmail.com)
  - check-target subcommand (ncoghlan@gmail.com)
  - Make destroy_containers iterate over all machine containers and delete it
    (amello@redhat.com)
  - Make it able to get stdout of a ssh command (amello@redhat.com)
  - Make it possible for user to define container name on target machine
    (amello@redhat.com)
  - Derive container name from source hostname (amello@redhat.com)
  - ui: Change timestamp to ISO8601 format (vfeenstr@redhat.com)
  - ui: Fix missing busy_ports variable by referring to the right one
    (vfeenstr@redhat.com)
  - UI: command line is shown in progress output (jmikovic@redhat.com)
  - Support local docs builds in pipenv config (ncoghlan@gmail.com)
  - UI: Fix enter key handler (jsycha@redhat.com)
  - UI: IP can be submitted with enter key (jsycha@redhat.com)
  - ui: Fix alignment of ports (vfeenstr@redhat.com)
  - ui: Skip Cockpit test because we're no longer listing VMs
    (vfeenstr@redhat.com)
  - ui: Cleanup of intermediate changes and fixed migrate-machine command
    (vfeenstr@redhat.com)
  - ui: Tooltip for port's usage (Used by...) and more cleanup
    (vfeenstr@redhat.com)
  - ui: Adding second option for the source style and restyled the logging output
    (vfeenstr@redhat.com)
  - ui: Fix source address related text (vfeenstr@redhat.com)
  - ui: Default target and source by IP changes (vfeenstr@redhat.com)
  - Tidy up port scanning in the test suite (ncoghlan@gmail.com)
  - NOJIRA: add waiting message (vmindru@redhat.com)
  -    TRELLO-124: amending UI tests    TRELLO-124: renmae le-app in the cockpit
    (vmindru@redhat.com)
  - Change output if Source/Target machine is not accessible via SSH
    (amello@redhat.com)
  - Add Arthur Mello (artmello) to be able to trigger integration tests
    (amello@redhat.com)
  - Clarify use cases for ensure_fresh=yes (ncoghlan@gmail.com)
  - Always reprovision even running test VMs (ncoghlan@gmail.com)
  - Always run migrate-machine with sudo (ncoghlan@gmail.com)
  - Support local docs builds in pipenv config (ncoghlan@gmail.com)
  - Add docs regarding VM setup in tests (ncoghlan@gmail.com)
  - Don't use ensure_fresh=yes in tests (ncoghlan@gmail.com)
  - Use EPEL Ansible package & dependencies (ncoghlan@gmail.com)
  - cli: Removed wrong import (vfeenstr@redhat.com)
  - integration-tests: Fix the migrate-machine calls (vfeenstr@redhat.com)
  - cli: Remove debugging code (vfeenstr@redhat.com)
  - cli: More tuning to get the migration to work with localhost and custom
    source (vfeenstr@redhat.com)
  - cli: Config refactoring (vfeenstr@redhat.com)
  - cli: Fixed paramiko host key check (vfeenstr@redhat.com)
  - cli: Allow to use different user names, identity files etc in migrate-machine
    (vfeenstr@redhat.com)
  - cli: Fixed more parts of the SSH code (vfeenstr@redhat.com)
  - cli: Add find_machine support for SSH discovery (vfeenstr@redhat.com)
  - cli: Code fixes from the refactoring (vfeenstr@redhat.com)
  - cli: Refactored out Vagrant SSH detection to driver (vfeenstr@redhat.com)
  - cli: SSH machine implementation (vfeenstr@redhat.com)
  - note more explicitely why to use sudo to start the VMs (pcahyna@redhat.com)
  - Fix the demo instructions: - demo/start_vms.sh is no more (since
    a1e8cbbf37c986fedcb66b152457394cc88f09de) - one should start the VMs using
    sudo, as leapp-tool is run under sudo as well   and it should be run under
    the same user as the VM provisioning (it accesses   the Vagrant cache of the
    user to find the domains, see also the commit   message for rev.
    59c9c23b627dfc48034715408b6d09c88bc9e665) - since rev.
    6e19c02f0d9378e0755870101842329a42289002, the '--user vagrant'   parameter is
    required (the default for ssh user was changed to the current   user).
    (pcahyna@redhat.com)
  - Build the RPM in pre-merge CI (ncoghlan@gmail.com)
  - Fix tito build errors (ncoghlan@gmail.com)
  - missing pub key for centos6-drools (mfranczy@redhat.com)
  - partially refactored migrate machine code (root@mgazdik-
    leapp.usersys.redhat.com)
  - tests are now verifying if the execution failed because of port collisions
    defined by user (root@mgazdik-leapp.usersys.redhat.com)
  - adding tests [WIP] (root@mgazdik-leapp.usersys.redhat.com)
  - Stop execution on user mapped port collision - initial commit
    (mgazdik@redhat.com)
  - get list by logic operator (mfranczy@redhat.com)
  - Defined portlist for port scanner and re-defined port-map based on portlist
    (root@mgazdik-leapp.usersys.redhat.com)
  - remove only default ports (mfranczy@redhat.com)
  - corrected error message in port_scan and added check for user_excluded_ports
    (mgazdik@redhat.com)
  - --tcp-port as mandatory param, remove default forwarded ports
    (mfranczy@redhat.com)
  - removed forgotten comments (mgazdik@redhat.com)
  - removed self check for protocol lists (mgazdik@redhat.com)
  - corrected docstrings (mgazdik@redhat.com)
  - corrected docstrings (mgazdik@redhat.com)
  - Relax the migration timing for CI again (ncoghlan@gmail.com)
  - Restore & fix destroy-containers subcommand (ncoghlan@gmail.com)
  - Revert "Don't test removed destroy-containers subcommand"
    (ncoghlan@gmail.com)
  - enabled shallow scan by default (root@mgazdik-leapp.usersys.redhat.com)
  - modified httpd-stateless test due to the same reasons as the portmapping
    tests (the machines need to be fresh so predict the new port mapping)
    (root@mgazdik-leapp.usersys.redhat.com)
  - modified tests, so they reset vms before they start (mgazdik@redhat.com)
  - Refactor storage path handling (ncoghlan@gmail.com)
  - Update comment to match task structure (ncoghlan@gmail.com)
  - Don't test removed destroy-containers subcommand (ncoghlan@gmail.com)
  - Fix various issues in macrocontainer removal (ncoghlan@gmail.com)
  - Corrected one test, added new one and code can now detect collisions with
    user mapped pots (root@mgazdik-leapp.usersys.redhat.com)
  - Add trailing newline (ncoghlan@gmail.com)
  - Split out target system cleanup (ncoghlan@gmail.com)
  - corrected tests and switched source:target ports in user port map building
    procedure [WIP] (root@leapp.mgnet.cz)
  - Added port exclusion [WIP] (root@leapp.mgnet.cz)
  - added --no-tcp-port argument (root@leapp.mgnet.cz)
  - PortMap is now subclass of OrderedDict [WIP] (root@mgazdik-
    leapp.usersys.redhat.com)
  - initial commit with PortMap class replacing OrderedDict [WIP]
    (mgazdik@redhat.com)
  - remove unused var (mfranczy@redhat.com)
  - fixed source_cfg (mfranczy@redhat.com)
  - add cfg for source (mfranczy@redhat.com)
  - added port_map init function (mgazdik@redhat.com)
  - machine context (mfranczy@redhat.com)
  - modified default mapping test in order to accomodate the port conflict resolv
    behavior (root@mgazdik-leapp.usersys.redhat.com)
  - Added basic port conflict resolver (root@mgazdik-leapp.usersys.redhat.com)
  - Added info for user about migrated ports (root@mgazdik-
    leapp.usersys.redhat.com)
  - solved switch ports + modified test accordingly (root@mgazdik-
    leapp.usersys.redhat.com)
  - if it's impossible to freeze fs then stop migration - for example perm denied
    (mfranczy@redhat.com)
  - remove unnecessary function from integration test (mfranczy@redhat.com)
  - fixed int tests (mfranczy@redhat.com)
  - int tests (mfranczy@redhat.com)
  - clean code (mfranczy@redhat.com)
  - fixed closing perm connection (mfranczy@redhat.com)
  - parameter name changed in port-inspect from ip -> address (root@mgazdik-
    leapp.usersys.redhat.com)
  - added error handling in migration scan (mgazdik@redhat.com)
  - catch exceptions (mfranczy@redhat.com)
  - rsync as alternative for virt-tar-out (mfranczy@redhat.com)
  - help for tcp-port difined properly (marcel@marcel.mg-net.cz)
  - added port override test (root@mgazdik-leapp.usersys.redhat.com)
  - Added new tests for default autodetection (root@mgazdik-
    leapp.usersys.redhat.com)
  - tweaking of the default port detection test steps (root@mgazdik-
    leapp.usersys.redhat.com)
  - defined test for getting default ports (root@mgazdik-
    leapp.usersys.redhat.com)
  - Added port detection test (WIP) (root@mgazdik-leapp.usersys.redhat.com)
  - minor changes (mgazdik@redhat.com)
  - Changed dicts back to arrays since it doesn't require modification of MC +
    minotr tweaks (mgazdik@redhat.com)
  - Changed array of ports to dict (mgazdik@redhat.com)
  - Disabled --udp-port option, but implementation is being kept in the code,
    ports can be overriden and added by user (mgazdik@redhat.com)
  - Added --udp-port option, continuing the work on re-mapping
    (mgazdik@redhat.com)
  - fixed some issues, odded port remappnig (mgazdik@redhat.com)
  - No preset user when installed via RPM (ncoghlan@gmail.com)
  - Use hyphens in config setting names (ncoghlan@gmail.com)
  - Note Splinter RFE for 'Enabled?' check (ncoghlan@gmail.com)
  - Remove hardcoded user from Cockpit plugin (ncoghlan@gmail.com)
  - Add test case for migration through the plugin (ncoghlan@gmail.com)
  - Make validity check more self-explanatory (ncoghlan@gmail.com)
  - Only use `sudo vagrant` when not root (ncoghlan@gmail.com)
  - Added basic structure of port override (mgazdik@redhat.com)
  - Modified migrate machine, so the port-inspect can be tested and new params as
    well (mgazdik@redhat.com)
  - Modified migrate machine, so the port-inspect can be tested and new params as
    well (mgazdik@redhat.com)
  - cockpit: Fix empty initial input scan attempt (vfeenstr@redhat.com)
  - cockpit: Fix toggle bug - did not hide input when custom gets unchecked
    (vfeenstr@redhat.com)
  - Restore ability to run tests as non-root user (ncoghlan@gmail.com)
  - Added _port_scan function and modified port-inspect to use it
    (mgazdik@redhat.com)
  - cli: Add back accidentally removed line (vfeenstr@redhat.com)
  - cli: Apply custom target support to destroy containers (vfeenstr@redhat.com)
  - cli: Apply custom target support to migrate-machine (vfeenstr@redhat.com)
  - Added Marcel Gazdik into list of authors (mgazdik@redhat.com)
  - cockpit: Add missing semicolon (vfeenstr@redhat.com)
  - cockpit: Simply and improve functionality (vfeenstr@redhat.com)
  - cockpit: Add custom target address support (vfeenstr@redhat.com)
  - cli: Allow FQDN to be used as argument for port-inspect (vfeenstr@redhat.com)
  - added /CONTRIBUTING.rst symlink to contributing.rst (mgazdik@redhat.com)
  - changed getting started link (mgazdik@redhat.com)
  - Replaced content of README.md files with links to the readthedocs pages
    (mgazdik@redhat.com)
  - Added Marcel Gazdik to the reviewers list & alph. sorted the list
    (mgazdik@redhat.com)
  - removed wrong comment from contributing.rst (mgazdik@redhat.com)
  - Amend the rationale for sticking with an older Selenium (ncoghlan@gmail.com)
  - Check for failure to load the login page (ncoghlan@gmail.com)
  - Enable Cockpit socket activation (ncoghlan@gmail.com)
  - Remove spurious trailing slash (ncoghlan@gmail.com)
  - Remove unintended task separator (ncoghlan@gmail.com)
  - Quote template expression correctly (ncoghlan@gmail.com)
  - CI: Add dev symlink for use by Cockpit plugin (ncoghlan@gmail.com)
  - Document the Selenium compatibility issue (ncoghlan@gmail.com)
  - Remove outdated check for geckodriver (ncoghlan@gmail.com)
  - Configure CI for UI testing (ncoghlan@gmail.com)
  - Enable Cockpit integration testing (ncoghlan@gmail.com)
  - Clarify failure when machines are missing (ncoghlan@gmail.com)
  - Added GAZDOWN user into integration-tests (mgazdik@redhat.com)
  - added /CONTRIBUTING.rst symlink to contributing.rst (mgazdik@redhat.com)
  - changed getting started link (mgazdik@redhat.com)
  - Replaced content of README.md files with links to the readthedocs pages
    (mgazdik@redhat.com)
  - Added Marcel Gazdik to the reviewers list & alph. sorted the list
    (mgazdik@redhat.com)
  - removed wrong comment from contributing.rst (mgazdik@redhat.com)
  - Amend the rationale for sticking with an older Selenium (ncoghlan@gmail.com)
  - Check for failure to load the login page (ncoghlan@gmail.com)
  - Enable Cockpit socket activation (ncoghlan@gmail.com)
  - Remove spurious trailing slash (ncoghlan@gmail.com)
  - Remove unintended task separator (ncoghlan@gmail.com)
  - Quote template expression correctly (ncoghlan@gmail.com)
  - CI: Add dev symlink for use by Cockpit plugin (ncoghlan@gmail.com)
  - Document the Selenium compatibility issue (ncoghlan@gmail.com)
  - Remove outdated check for geckodriver (ncoghlan@gmail.com)
  - Configure CI for UI testing (ncoghlan@gmail.com)
  - Enable Cockpit integration testing (ncoghlan@gmail.com)
  - Clarify failure when machines are missing (ncoghlan@gmail.com)
  - Be pythonic and follow pep8 (vfeenstr@redhat.com)
  - Add package listing for non-shallow scans (vfeenstr@redhat.com)
  - Name changed from LeApp-To back to LeApp (mgazdik@redhat.com)
  - Drop creation of ovirt-guest-agent channels (vfeenstr@redhat.com)
  - Drop ovirt-guest-agent ansible role usage (vfeenstr@redhat.com)
  - TRELLO#104 Inspect source machine only using ssh (vfeenstr@redhat.com)
  - WIP install steps - the vagrant modules build procedure must be tested
    (mgazdik@redhat.com)
  - WIP on install steps for CentOS7, RHEL7, Fedora 25 (mgazdik@redhat.com)
  - removed emoticons (mgazdik@redhat.com)
  - added demo documentation (mgazdik@redhat.com)
  - Changed project name Leapp -> LeApp-To (mgazdik@redhat.com)
  - added integration tests and linked with contributing (mgazdik@redhat.com)
  - added contributing (mgazdik@redhat.com)
  - TRELLO#97 - Use direct libguestfs backend to avoid libvirt disk image
    relabeling (vfeenstr@redhat.com)
  - content polishing (mgazdik@redhat.com)
  - modified content in multiple pages, added content into leapp tool
    (mgazdik@redhat.com)
  - Updated docs for RPM usage (vfeenstr@redhat.com)
  - added forgoten comment (mgazdik@redhat.com)
  - changed theme to RTD (mgazdik@redhat.com)
  - changed README.md in centos-ci and / and added link to RTD
    (mgazdik@redhat.com)
  - changed order in menu (mgazdik@redhat.com)
  - added leapp-tool CLI command page and ui page (mgazdik@redhat.com)
  - initial commit of centosci and geting started pages (mgazdik@redhat.com)
  - initial Sphinx setup comit (mgazdik@redhat.com)
  - Rephrase README, Fix cockpit (jsycha@redhat.com)
  - Fully resolve merge conflict (ncoghlan@gmail.com)
  - Declare sshpass dependency in RPM spec (ncoghlan@gmail.com)
  - Use updated parameter name (ncoghlan@gmail.com)
  - Install sshpass from EPEL for --ask-pass testing (ncoghlan@gmail.com)
  - port-scan --shallow - integration tests (mfranczy@redhat.com)
  - Finish reverting partial edit (ncoghlan@gmail.com)
  - Support --ask-pass option in CLI (ncoghlan@gmail.com)
  - fixed tests (mfranczy@redhat.com)
  - remove whitespaces (mfranczy@redhat.com)
  - fixed integration tests (mfranczy@redhat.com)
  - remove console.log(s) (mfranczy@redhat.com)
  - get info about products which are listening on discovered ports
    (mfranczy@redhat.com)
  - user can choose port manually (mfranczy@redhat.com)
  - use fast port scan to collect information about used ports
    (mfranczy@redhat.com)
  - fast port scan (mfranczy@redhat.com)
  - syntax styling (mgazdik@redhat.com)
  - REDME.md modifications (root@mgazdik-leapp.usersys.redhat.com)
  - Cockpit: Show version info (vfeenstr@redhat.com)
  - Cockpit: configuration of tool path (vfeenstr@redhat.com)
  - vagrant stop command is halt (vfeenstr@redhat.com)
  - Fix ansible roles path broken in #109 (vfeenstr@redhat.com)
  - NOJIRA: ammending README as per PR review (vmindru@redhat.com)
  - Remove trailing semi-colon from ssh-agent settings (ncoghlan@gmail.com)
  - Leaving the documented tool path in cockpit and fix it during rpm creation
    for RPM installations (vfeenstr@redhat.com)
  - Start ssh-agent in integration tests when necessary (ncoghlan@gmail.com)
  - NOJIRA: ammending README as per PR review (vmindru@redhat.com)
  - Fix tool path in cockpit (vfeenstr@redhat.com)
  - Fixed spec file changelog and removed duplicate entries due to tito misusage
    (vfeenstr@redhat.com)
  - Actually test ssh-agent based authentication (ncoghlan@gmail.com)
  - Set return code for destroy-containers command (ncoghlan@gmail.com)
  - Consolidate LeApp id management in integration tests (ncoghlan@gmail.com)
  - Update test docs for new feature & steps (ncoghlan@gmail.com)
  - Allow use of default SSH credentials in CLI (ncoghlan@gmail.com)
  - TRELLO#70: ammend docs in README (vmindru@redhat.com)
  - TRELLO#70: incorporate changes from #105 (vmindru@redhat.com)
  - TRELLO#70: ading clean start action, merging all scripts into one
    (vmindru@redhat.com)
  - Using a spec file for specifying required dependencies to run the demo
    (vfeenstr@redhat.com)


author: Vinzenz Feenstra <vfeenstr@redhat.com> 0.1-33
changelog:
  - Version bump for 0.1 (vfeenstr@redhat.com)
  - Added --freeze-fs option into migrate command, freezefs is not used by
    default (mgazdik@redhat.com)
  - Test Leapp RPM in CI (#253) (ncoghlan@gmail.com)
  - Removed commented part of code (mgazdik@redhat.com)
  - GUI: Port mapping error messaging (mgazdik@redhat.com)
  - NOJIRA: update the getstarted with youtube video (vmindru@redhat.com)
  - cli: Disable interfering init services on el6 (vfeenstr@redhat.com)
  - spec: Fix directory creation (vfeenstr@redhat.com)
  - NOJIRA: create /var/lib/leapp/macrocontainers as part of leapp-cockpit
    install (vmindru@redhat.com)
  - NOJIRA: udpate getstarted with latest relevant info (vmindru@redhat.com)
  - Update Python level CI dependencies (#229) (ncoghlan@gmail.com)
  - NOJIRA: peer review (vmindru@redhat.com)
  - NOJIRA: right now leapp won't run on a fresh install, it misses docker during
    setup and python  libs (vmindru@redhat.com)
  - NOJIRA: right now leapp won't run on a fresh install, it misses docker during
    setup and python  libs (vmindru@redhat.com)
  - excluded paths can be empty array now (mgazdik@redhat.com)
  - Changed error type and variable name (mgazdik@redhat.com)
  - --exclude-path overrides default list (mgazdik@redhat.com)
  - CLI: Added support for exclude paths (mgazdik@redhat.com)
  - Add exc??uded paths - initial commit (mgazdik@redhat.com)
  - NOJIRA: rename repo to leapp (vmindru@redhat.com)
  - fix: Use rsync backend by default (podvody@redhat.com)
  - stop using _LOCALHOST, simple check if ip is in (127.0.0.1, localhost)
    (mfranczy@redhat.com)
  - add 127.0.0.1 to _LOCALHOST const (mfranczy@redhat.com)
  - Remove the fix_upstart function, turns out that it was not needed (and
    actually there has been no service named mysqld, only mysql55-mysqld, so the
    mysqld part never did anything). (pcahyna@redhat.com)
  - bugfix - do not resolve localhost to ip (mfranczy@redhat.com)
  - NOJIRA: update CLI version during RPM build (vmindru@redhat.com)
  - NOJIRA: add new tox file with line length (vmindru@redhat.com)
  - Clarify purpose of "pipenv install" task (ncoghlan@gmail.com)
  - Restore Cockpit plugin test (ncoghlan@gmail.com)
  - catch all Exceptions.* (mfranczy@redhat.com)
  - resolve fqdn to ip (mfranczy@redhat.com)
  - spec: Fix json output (vfeenstr@redhat.com)
  - remove unnecessary PortsException - do not raise if hostname is not in
    scan.all_hosts, check only error value (mfranczy@redhat.com)
  - integration-tests: Install tito build rpm (vfeenstr@redhat.com)
  - integration-tests: Add python2-nmap rpm directly (vfeenstr@redhat.com)
  - spec: Fix el7 deps (vfeenstr@redhat.com)
  - integration-tests: Install the tito built RPM (vfeenstr@redhat.com)
  - spec: Fix psutil dependency (vfeenstr@redhat.com)
  - spec: Fix cockpit config generation (vfeenstr@redhat.com)
  - Disabled default port mapping for migration executed from UI
    (mgazdik@redhat.com)
  - restore previous assertion for port-mapping int-tests (mfranczy@redhat.com)
  - instead of using has_items from hamcrest, use more explicit assertion
    (mfranczy@redhat.com)
  - fix integration tests (mfranczy@redhat.com)
  - check if port-mapping result contains expected ports (mfranczy@redhat.com)
  - add missed port - port mapping integration tests (mfranczy@redhat.com)
  - psutil package for setup.py (mfranczy@redhat.com)
  - psutil package (mfranczy@redhat.com)
  - restore PortScanException (mfranczy@redhat.com)
  - clean code (mfranczy@redhat.com)
  - use psutil.net_connections when it comes to scan localhost
    (mfranczy@redhat.com)
  - cli: By default do not check host keys as a workaround (vfeenstr@redhat.com)
  - _port_remap is static now, removed default parameters for _port_remap
    (mgazdik@redhat.com)
  - ui: Using blue for running commands instead of orange (vfeenstr@redhat.com)
  - _port_remap moved into MigrationContext since it is being used by map_ports
    method directly (mgazdik@redhat.com)
  - port map can now handle set of target ports per a source port
    (mgazdik@redhat.com)
  - ui: Remove debug logging (vfeenstr@redhat.com)
  - ui: Add back release and lock for import (vfeenstr@redhat.com)
  - ui: Refactor call_leapp to be usable concurrently and add exandable logs
    (vfeenstr@redhat.com)
  - Removed checkbox ID port list (mgazdik@redhat.com)
  - corrected input port verification (mgazdik@redhat.com)
  - Implemented changes suggested in comments (mgazdik@redhat.com)
  - Polishing of the code (mgazdik@redhat.com)
  - ui: Add custom port mapping form (mgazdik@redhat.com)
  - TRELLO-163: adding callback profile to see time details (vmindru@redhat.com)
  - TRELLO-163: peer review         add step description         fix date alias
    add time since begining reporting         add timestamps and command  time
    duration execution reporting (vmindru@redhat.com)
  - Remove list-machines tests & helpers (ncoghlan@gmail.com)
  - Override correct variable name (ncoghlan@gmail.com)
  - Configure correct user for host macrocontainer storage (ncoghlan@gmail.com)
  - Simplify network interface regex (ncoghlan@gmail.com)
  - Update test documentation (ncoghlan@gmail.com)
  - Add CLI test case for local machine imports (ncoghlan@gmail.com)
  - Fix interface regex on Fedora (ncoghlan@gmail.com)
  - Add Docker to CI testing host (ncoghlan@gmail.com)
  - ui: Fix visual port collission handling in UI (vfeenstr@redhat.com)
  - ui: refactor port adding into separate function for easier reuse
    (vfeenstr@redhat.com)
  - ui: Use patternfly compatible classes (vfeenstr@redhat.com)
  - ui: Implement port mapping from CLI (vfeenstr@redhat.com)
  - cli: Fix target IP list (vfeenstr@redhat.com)
  - ui: Add a tooltip to the force create checkbox (vfeenstr@redhat.com)
  - ui: Force creation checkbox checked by default (vfeenstr@redhat.com)
  - ui: Force create command implementation (vfeenstr@redhat.com)
  - Use sys.exit instead of exit (amello@redhat.com)
  - Restore handling of missing storage directories (ncoghlan@gmail.com)
  - Fix step function name (ncoghlan@gmail.com)
  - Add --force-create option to migrate-machine (ncoghlan@gmail.com)
  - Add selective destroy-container subcommand (ncoghlan@gmail.com)
  - integration-tests: Use ssh-agent in cockpit test (vfeenstr@redhat.com)
  - ui: Forward the agent socket (vfeenstr@redhat.com)
  - Verify return value of find_machine preventing app to show a bt to user
    (amello@redhat.com)
  - enable concurrent runs (kbsingh@karan.org)
  - During check-target do not fail if storage dir is missing on target machine
    (amello@redhat.com)
  - bugfix: pass container name var into MigrateContext (mfranczy@redhat.com)


author: Vinzenz Feenstra <vfeenstr@redhat.com> 0.1-36
changelog:
  - docs: Add instructions on how to set up a dev env (fabiojrb@gmail.com)
  - ui: Log output remove duplications and empty lines (vfeenstr@redhat.com)
  - Added identity related parameters into fsfreeze tests steps
    (mgazdik@redhat.com)
  - Added workaround for: https://bugzilla.redhat.com/show_bug.cgi\?id\=1474726
    (mgazdik@redhat.com)
  - Added fsfreeze test scenarios (mgazdik@redhat.com)
  - Updated docs (mgazdik@redhat.com)
  - FS freeze enabled by default, updated fs-freeze option behavior
    (mgazdik@redhat.com)
  - integration-tests: Fully enable the new test (vfeenstr@redhat.com)
  - integration-tests: Implement restart docker functions (vfeenstr@redhat.com)
  - integration-tests: Fixed signature of restart container tests
    (vfeenstr@redhat.com)
  - integration-tests: Add container-name support (vfeenstr@redhat.com)
  - NOJIRA:  skip for test (vmindru@redhat.com)
  - NOJIRA: attempt manual rebase (vmindru@redhat.com)
  - cli: no more group checks (vfeenstr@redhat.com)
  - all: Drop virt-tar-out usage and libguestfs dependency (vfeenstr@redhat.com)
  - integration-tests: Use IP address for commands (vfeenstr@redhat.com)
  - cli: Remove libvirt code (vfeenstr@redhat.com)
  - remove list-machines from docs (jmikovic@redhat.com)
  - libvirt no longer required (jmikovic@redhat.com)
  - LibvirtMachineProvider is not used anymore (jmikovic@redhat.com)
  - cli: remove list-machines cmd (jmikovic@redhat.com)
  - ZSH autocomplete script correction (mgazdik@redhat.com)
  - update docs with disable-start option (jmikovic@redhat.com)
  - cli: create container (jmikovic@redhat.com)
  - fix log and typo (jmikovic@redhat.com)
  - ui: disable start if checkbox unchecked (jmikovic@redhat.com)
  - ui: add start-container checkbox (jmikovic@redhat.com)
  - cli: add disable-start argument (jmikovic@redhat.com)
  - integration-tests: Pass through auth socket when using sudo
    (vfeenstr@redhat.com)
  - integrationt-tests: Add remote access check for CentOS 6 too
    (vfeenstr@redhat.com)
  - integration-tests: facilitate the ssh agent by default with identity
    (vfeenstr@redhat.com)
  - cli: Start SSH Agent if not available and an identity has been passed
    explicitly (vfeenstr@redhat.com)
  - cli: Add key to ssh-agent if identity file passed (vfeenstr@redhat.com)
  - cli: Drop _find_machine to avoid libvirt errors (vfeenstr@redhat.com)
  - integration-tests: Fix new epel release number (vfeenstr@redhat.com)
  - Let Docker send SIGINT to Upstart to let it shutdown the services properly.
    Upstart interprets SIGINT as Ctrl-Alt-Del and runs the shutdown scripts.
    (pcahyna@redhat.com)
  - CLI: Added support for autocompletion in BASH & ZSH (mgazdik@redhat.com)
  - Docs: added check-target command to leapp-tool page (mgazdik@redhat.com)
  - Set proper target in test (mgazdik@redhat.com)
  - Typo corretions (mgazdik@redhat.com)
  - Minor help & docs corrections (mgazdik@redhat.com)
  - updated docs (mgazdik@redhat.com)
  - Updated UI to respect new target option (mgazdik@redhat.com)
  - updated tests to follow the option changes (mgazdik@redhat.com)
  - Set default target for destroy-container and check-target
    (mgazdik@redhat.com)
  - Add: ansible boolean container_manage_cgroup, better comments
    (mgazdik@redhat.com)
  - Added UI screenshots and content of Cockpit UI page (#259)
    (GAZDOWN@users.noreply.github.com)
  - spec: trivial fixes (#255) (ignatenko@redhat.com)
  - Added systemd source & migration test (mgazdik@redhat.com)
  - Enable systemd based source machine migration (mgazdik@redhat.com)
  - Enable check-target to show availability of docker/rsync on target machine
    (#196) (amello@redhat.com)
  - Added preliminary error handling, code refactoring (mgazdik@redhat.com)
  - docs: Update repo links to use the stable repo (vfeenstr@redhat.com)
  - NOJIRA: new demo gif (vmindru@redhat.com)
  - WIP - Adde help button (mgazdik@redhat.com)
  - WIP: UI: Add exclude paths input (mgazdik@redhat.com)
  - Prevent fsck from running. (pcahyna@users.noreply.github.com)
  - Remove references to LeApp-To in the docs (replace by LeApp). Leave only
    "LeApp-To Organization on Github" as the organization is indeed still called
    leapp-to. (pcahyna@users.noreply.github.com)


author: Vinzenz Feenstra <vfeenstr@redhat.com> 0.2-1
changelog:
  - boostrap: Install build deps (vfeenstr@redhat.com)
  - centos-ci: Build and install snactor (vfeenstr@redhat.com)
  - Vagrantfile: Use host-passthrough for libvirt configuration to avoid errors
    in vagrant-libvirt (vfeenstr@redhat.com)
  - actor_cli: Only try to remove the socket and its directory when they do still
    exist (vfeenstr@redhat.com)
  - Documentation update (vfeenstr@redhat.com)
  - FS Freeze removal (vfeenstr@redhat.com)
  - Properly handle execption cases with the stdout server (vfeenstr@redhat.com)
  - actor_cli: add 'use default port map' option (vfeenstr@redhat.com)
  - Drop old code (vfeenstr@redhat.com)
  - actor_cli: Use remote target check group (vfeenstr@redhat.com)
  - actor_cli: Fix naming order in port map (vfeenstr@redhat.com)
  - actor_cli: Fix input format for excluded tcp ports (vfeenstr@redhat.com)
  - actor_cli: Add debug flags (vfeenstr@redhat.com)
  - integration-tests: Install latest snactor from git (vfeenstr@redhat.com)
  - Actor based updates to integration tests and logging (vfeenstr@redhat.com)
  - Now leapp-actor-tool is the leapp-tool (vfeenstr@redhat.com)
  - Preparation for 0.2 (vfeenstr@redhat.com)
  - actor_cli: Fix port mapping inputs (vfeenstr@redhat.com)
  - actor_cli: Fix output and check target group name (vfeenstr@redhat.com)
  - centos-ci: We do now need the actor tools rpm too (vfeenstr@redhat.com)
  - spec: Add actor-stdout to the spec file (vfeenstr@redhat.com)
  - actor_cli: register LEAPP_ACTOR_OUTPUT environment variable
    (vfeenstr@redhat.com)
  - port-inspect: Finalization (vfeenstr@redhat.com)
  - actor_cli: Fix options for port-inspect (vfeenstr@redhat.com)
  - actor_cli: Support for other commands (vfeenstr@redhat.com)
  - actor_cli: Fix SIGTERM name + logging format shows now actor name
    (vfeenstr@redhat.com)
  - actor_cli: Fix typo (vfeenstr@redhat.com)
  - stdout tool integration (vfeenstr@redhat.com)
  - actor_cli: Finalize (vfeenstr@redhat.com)
  - ui: Fix syntax in condition (vfeenstr@redhat.com)
  - username needs to be not None before transforming it to the object form
    (vfeenstr@redhat.com)
  - user_container_name cannot be None (vfeenstr@redhat.com)
  - ports need to be integers not strings (vfeenstr@redhat.com)
  - excluded_paths needs to be list not a tuple (vfeenstr@redhat.com)
  - Add schema loading (vfeenstr@redhat.com)
  - ui: Fix options (vfeenstr@redhat.com)
  - actor_tool: Necessary cockpit modifications (vfeenstr@redhat.com)
  - actor_cli: Fix empty parameter cases (vfeenstr@redhat.com)
  - Fixed port mapping format (vfeenstr@redhat.com)
  - Rename container_name to user_container_name based on changes in actors
    (vfeenstr@redhat.com)
  - spec: The package dependency is called python-snactor (vfeenstr@redhat.com)
  - ci: GPG Checks for the copr repo (vfeenstr@redhat.com)
  - spec: Need to specify symlinks in data dir (vfeenstr@redhat.com)
  - spec: Fix typo (vfeenstr@redhat.com)
  - spec: Install symlinks links to the snactor actors (vfeenstr@redhat.com)
  - Missing commands and simplification of the parameter creation
    (vfeenstr@redhat.com)
  - Remove identity file support - This is not a good thing anyway and was
    previously more a courtesy than a real feature (vfeenstr@redhat.com)
  - Some more aesthetic improvements (vfeenstr@redhat.com)
  - Initial snactor integration (vfeenstr@redhat.com)
  - centos-ci: Fix bootstrap (vfeenstr@redhat.com)
  - integration-tests: Skip fsfreeze=True since we hard disabled it
    (vfeenstr@redhat.com)
  - Added short note why we need seccomp and mount for systemd
    (mgazdik@redhat.com)
  - Used seccomp instad of sys_admin cap for systemd (mgazdik@redhat.com)
  - Fix typo in 'mkdir' (jzigmund@redhat.com)


author: Vinzenz Feenstra <vfeenstr@redhat.com> 0.2-39
changelog:
  - Add the Actors decriptions (jzigmund@redhat.com)
  - checks aren't happy about the print (vfeenstr@redhat.com)
  - migrate-machine: Add target verification before starting to sync
    (vfeenstr@redhat.com)
  - create-container: Proper error handling (vfeenstr@redhat.com)
  - create_container: Report failure if there was an error (vfeenstr@redhat.com)
  - sudo has to be within the scripts (vfeenstr@redhat.com)
  - Attempt to solve the remote execution problems (vfeenstr@redhat.com)
  - ansible-script: Dump script arguments as json string if they are dicts
    (vfeenstr@redhat.com)
  - create_container: Use a shebang (vfeenstr@redhat.com)
  - start/create container remote (vfeenstr@redhat.com)
  - portmap: Fixed pep8 violation (vfeenstr@redhat.com)
  - portmap: Fix user conversion properly (vfeenstr@redhat.com)
  - portmap: Fix user conversion (vfeenstr@redhat.com)
  - rsync: Add remote target support (vfeenstr@redhat.com)
  - port-mapping: Missing input (vfeenstr@redhat.com)
  - migrate-machine: Missing input use_default_port_map (vfeenstr@redhat.com)
  - ansible-module: Using ANSIBLE_HOST_KEY_CHECKING instead (vfeenstr@redhat.com)
  - containers_list: Fix the real reason for the quotes (vfeenstr@redhat.com)
  - containers_list: Strip quotes around container names (vfeenstr@redhat.com)
  - Fix broken tests (vfeenstr@redhat.com)
  - ansible_module: Disable strict host key checking (vfeenstr@redhat.com)
  - remote-target-check: Sort container list (vfeenstr@redhat.com)
  - portmap: Adding missing use_default_port_map option (vfeenstr@redhat.com)
  - ansible-module executor: Also consider 127.0.0.1 as local
    (vfeenstr@redhat.com)
  - Fix remote-destroy-container name (vfeenstr@redhat.com)
  - remote target check group (vfeenstr@redhat.com)
  - Added actors for remote target capabilities (vfeenstr@redhat.com)
  - actors: Refactored docker_info and rsync_info actors (vfeenstr@redhat.com)
  - add tag to a forgotten actor (pcahyna@users.noreply.github.com)
  - fix warnings (pcahyna@users.noreply.github.com)
  - whitespace (pcahyna@users.noreply.github.com)
  - Add a script analogous to checktarget.py, using leappwf.
    (pcahyna@users.noreply.github.com)
  - Tag actors that are ready to be composed into a check-target workflow
    (pcahyna@users.noreply.github.com)
  - Add a gnereic leappwf workflow run function.
    (pcahyna@users.noreply.github.com)
  - change img to leapp-scratch (jmikovic@redhat.com)
  - portmap: Fix user port map translation (vfeenstr@redhat.com)
  - Missing pipe in actor (vfeenstr@redhat.com)
  - check-target: Add missing directory list functionality (vfeenstr@redhat.com)
  - check-target actors: Add missing 'status' feature (vfeenstr@redhat.com)
  - port-mapping-output: Fix output to be valid JSON (vfeenstr@redhat.com)
  - setup.py: requires should be install requires (vfeenstr@redhat.com)
  - check_target_group: Missing output actor (vfeenstr@redhat.com)
  - actors: Add port-mapping related actors (vfeenstr@redhat.com)
  - actors: check-target-output actor (vfeenstr@redhat.com)
  - port-inspect-output: Fix name and parameter to print the righ thing
    (vfeenstr@redhat.com)
  - port-inspect: Group + Printer (vfeenstr@redhat.com)
  - registry: Fix missing export (vfeenstr@redhat.com)
  - Add tags to actor definition to allow searching loaded actors by tags.
    (pcahyna@users.noreply.github.com)
  - Actor: changed inputs of common postconfig actor (mgazdik@redhat.com)
  - Add actors: Added actor for common postconfig ops (hosts, resolv...)
    (mgazdik@redhat.com)
  - Add force option to create container (vfeenstr@redhat.com)
  - fix post_configure_upstart actor (vfeenstr@redhat.com)
  - fix rsync and portmap actors (vfeenstr@redhat.com)
  - portscan fix format (vfeenstr@redhat.com)
  - schema: introduction of must_get_schema (vfeenstr@redhat.com)
  - group actor: Improved the missing input message to be shorter
    (vfeenstr@redhat.com)
  - pep8: Fix line length (vfeenstr@redhat.com)
  - actor: Fixed naming and input/output naming for migrate-machine
    (vfeenstr@redhat.com)
  - actors: More migrate machine requirements fulfilled (vfeenstr@redhat.com)
  - group: Verify that all inputs are satisfied (vfeenstr@redhat.com)
  - pep8: Missing new line at end of file (vfeenstr@redhat.com)
  - Correct the target info schema: docker and rsync messages are Null in case of
    success. Suggested by @vinzenz and corrected by @artmello.
    (pcahyna@users.noreply.github.com)
  - Split registry into modules and add unit tests (fabiojrb@gmail.com)
  - actors: add inspect machine using ansible and extend ansible executor
    (vfeenstr@redhat.com)
  - Rename 'container_name' input to 'user_container_name' for
    create_container_name actor (jzigmund@redhat.com)
  - Complements b37b8c4 by changing dict key as well (fabiojrb@gmail.com)
  - spec: Fixed syntax errors and warnings (vfeenstr@redhat.com)
  - spec: Fix condition in the spec file (vfeenstr@redhat.com)
  - No tests on FC25 (vfeenstr@redhat.com)
  - spec: NO flake 8 and cov for FC25 (vfeenstr@redhat.com)
  - Add set_container_directory_actor (fabiojrb@gmail.com)
  - spec: Directly depend on python packages not via macro (vfeenstr@redhat.com)
  - Fix schema create_container actor (fabiojrb@gmail.com)
  - unify channel names and types (jmikovic@redhat.com)
  - Add create_container_name actor (jzigmund@redhat.com)
  - validation: Final fixes for schema validation (vfeenstr@redhat.com)
  - schema: More fixes for the schema validation parts (vfeenstr@redhat.com)
  - tests: Some more fixes (vfeenstr@redhat.com)
  - pep8: Do not fail on unused imports or nonstandard import locations
    (vfeenstr@redhat.com)
  - testing: Refactor scripts for stripping more of the boilerplate
    (vfeenstr@redhat.com)
  - Fixing validation issues and pep8 issues (vfeenstr@redhat.com)
  - schema validation: Fixed design issues and made the registration work
    (vfeenstr@redhat.com)
  - schema validation: Fixed design issues and made the registration work
    (vfeenstr@redhat.com)
  - pep8: Fix too long line (vfeenstr@redhat.com)
  - loader: fixed missing post_resolve passing (vfeenstr@redhat.com)
  - import: reordered import dependencies (mgazdik@redhat.com)
  - deps: added dependencies to spec and requirements file (mgazdik@redhat.com)
  - Added schema validation (mgazdik@redhat.com)
  - lib: Make use of the filter_by_channel function where appropriate
    (vfeenstr@redhat.com)
  - Use ExposedPorts schema in portmap actor (fabiojrb@gmail.com)
  - Corrected typo in the name of a file, name of type, code cleanup
    (mgazdik@redhat.com)
  - Added rsync and array->csv actors (mgazdik@redhat.com)
  - Improve create_container actor and schema (fabiojrb@gmail.com)
  - Add create_container_dir actor (jzigmund@redhat.com)
  - spec: Install also examples so they can be linked from other packages
    (vfeenstr@redhat.com)
  - Add start_container actor (jzigmund@redhat.com)
  - Update Travis file (fabiojrb@gmail.com)
  - Fix style errors (fabiojrb@gmail.com)
  - Extend tests (fabiojrb@gmail.com)
  - fix targetinfo schema (jmikovic@redhat.com)
  - change OneOfField to ArrayField when all the data is expected
    (jmikovic@redhat.com)
  - use appropriate fields in machineinfo schema (jmikovic@redhat.com)
  - Allow empty data in value (mgazdik@redhat.com)
  - Extended unresoved reference error in order to give hint (mgazdik@redhat.com)
  - Refactoring loader (vfeenstr@redhat.com)
  - Add create_container actor (fabiojrb@gmail.com)
  - A little bit of usability changes - Don't create classes on the fly
    (vfeenstr@redhat.com)
  - Some cleanup (vfeenstr@redhat.com)
  - Add more unittests for loader.py (amello@redhat.com)
  - Add inspect machine actor(s) (amello@redhat.com)
  - Refactor checktarget to use group actor (amello@redhat.com)
  - fix loading of input data (jmikovic@redhat.com)
  - add default post_conf actor (jmikovic@redhat.com)
  - create post_configure_upstart actor (jmikovic@redhat.com)
  - Added portscan (and derivates), portmap and container delete actors with
    djson schemas (mgazdik@redhat.com)
  - do not try to handle stdout if there is none and none is expected
    (jmikovic@redhat.com)
  - No debug package (vfeenstr@redhat.com)
  - spec: PyYAML is a build and runtime requirement (vfeenstr@redhat.com)


author: Vinzenz Feenstra <vfeenstr@redhat.com> 0.2-40
changelog:
  - Install snactor-runner tool (amello@redhat.com)
  - Added debug logging to executor (vfeenstr@redhat.com)
  - README: Updated to the current state (vfeenstr@redhat.com)
  - Schema versioning applied + more simplification of the actor format
    (vfeenstr@redhat.com)
  - Fixed remote variable resolving: wrong parameter order (vfeenstr@redhat.com)
  - Refactored remote_execute a bit (vfeenstr@redhat.com)
  - ADD: Initial implementation of schema versioning (mgazdik@redhat.com)
  - remote.host and remote.user need to have variable support
    (vfeenstr@redhat.com)
  - Added remote ability via an ansible playbook (vfeenstr@redhat.com)
  - Drop extends and ansible executors (vfeenstr@redhat.com)
  - Drop python and bash executors (vfeenstr@redhat.com)
  - Drop payload support (vfeenstr@redhat.com)
  - Updated GETTING_STARTED.md (amello@redhat.com)
  - Update GETTING_STARTED.md (amello@redhat.com)
  - Start docummenting HowTo create an Actor (amello@redhat.com)
  - Set logging stream to sys.stderr (amello@redhat.com)
  - Add runner: a tool to execute actors using snactor (amello@redhat.com)


